Anomaly Detection via Online Over-Sampling Principal Component Analysis

Anomaly Detection via Online Over-Sampling Principal Component Analysis

 

ABSTRACT:

Anomaly detection has been an important research topic in data mining and machine learning. Many real-world applications such as intrusion or credit card fraud detection require an effective and efficient framework to identify deviated data instances. However, most anomaly detection methods are typically implemented in batch mode, and thus cannot be easily extended to large-scale problems without sacrificing computation and memory requirements. In this paper, we propose an online over-sampling principal component analysis (osPCA) algorithm to address this problem, and we aim at detecting the presence of outliers from a large amount of data via an online updating technique. Unlike prior PCA based approaches, we do not store the entire data matrix or covariance matrix, and thus our approach is especially of interest in online or large-scale problems. By over-sampling the target instance and extracting the principal direction of the data, the proposed osPCA allows us to determine the anomaly of the target instance according to the variation of the resulting dominant eigenvector. Since our osPCA need not perform eigen analysis explicitly, the proposed framework is favored

for online applications which have computation or memory limitations. Compared with the well-known power method for PCA and other popular anomaly detection algorithms, our experimental results verify the feasibility of our proposed method in terms of both accuracy and efficiency.

 EXISTING SYSTEM:

The existing approaches can be divided into three categories:

  1. distribution (statistical),
  2. distance and
  3. density based methods.

Statistical approaches assume that the data follows some standard or predetermined distributions, and this type of approach aims to find the outliers which deviate form such distributions.

For distance-based methods, the distances between each data point of interest and its neighbors are calculated. If the result is above some predetermined threshold, the target instance will be considered as an outlier.

One of the representatives of this type of approach is to use a density based local outlier factor (LOF) to measure the outlierness of each data instance. Based on the local density of each data instance, the LOF determines the degree of outlierness, which provides suspicious ranking scores for all samples. The most important property of the LOF is the ability to estimate local data structure via density estimation. This allows users to identify outliers which are sheltered under a global data structure

DISADVANTAGES OF EXISTING SYSTEM:

Most distribution models are assumed univariate, and thus the lack of robustness for multidimensional data is a concern. Moreover, since these methods are typically implemented in the original data space directly, their solution models might suffer from the noise present in the data

PROPOSED SYSTEM:

PCA is a well known unsupervised dimension reduction method, which determines the principal directions of the data distribution. This will prohibit the use of our proposed framework for real-world large-scale applications. Although the well known power method is able to produce approximated PCA solutions, it requires the storage of the covariance matrix and cannot be easily extended to applications with streaming data or online settings. Therefore, we present an online updating technique for our osPCA. This updating technique allows us to efficiently calculate the approximated dominant eigenvector without performing eigen analysis or storing the data covariance matrix.

ADVANTAGES OF PROPOSED SYSTEM:

  • Compared to the power method or other popular anomaly detection algorithms, the required computational costs and memory requirements are significantly reduced, and thus our method is especially preferable in online, streaming data, or large scale problems.

SYSTEM ARCHITECTURE:

ALGORITHMS USED:

Anomaly Detection via Online Oversampling PCA

MODULES

1. Cleaning Data

2. Detecting Outliers

3. Clustering

 

MODULES DESCRIPTION

 

MODULE – I

Cleaning Data

The osPCA is applied for the data set for finding the principal direction. In this method the target instance will be duplicated multiple times, and the idea is to amplify the effect of outlier rather than that of normal data. After that using Leave One Out (LOO) strategy, the angle difference will be identified. In which if we add or remove one data instance, the direction will be changed. For normal data instances this angle difference should be smaller and for outliers this might be larger.

A set of data instances in the original data set is taken as predefined input. This data may be contaminated by noise and incorrect data labelling etc., This data might be error free, because this is going to be used as training data. So the cleaning is done using Over-Sampling Principal Component Analysis (osPCA) method. And then the score of outlierness St is calculated for each data instances. The smallest St value is taken as the threshold value.

MODULE – II

Detection

     

       This is for detecting the outlierness of the user input. When the user giving the input to the system, the system calculate the St value for the new input. And then compare that new St value with the threshold value which is calculated in earlier.

         If the St value of the new data instance is above the threshold value, then that input data is identified as an outlier and that value will be discarded by the system. Otherwise it is considered as a normal data instance, and the PCA value of that particular data instance is updated accordingly.

MODULE – III

Clustering

      

       The training data will be selected only by our assumption.  So there is a possibility that some outlier data may be considered as normal data in the previous method due to our training data. So the clustering method is used to solve this problem. The clusters are formed for input data instances and then the outlier calculation is applied for each cluster to find the outlier exactly.

SYSTEM CONFIGURATION:-

HARDWARE CONFIGURATION:-

ü Processor             -        Pentium –IV

ü Speed                             -        1.1 Ghz

ü RAM                    -        256 MB(min)

ü Hard Disk            -        20 GB

ü Key Board            -        Standard Windows Keyboard

ü Mouse                  -        Two or Three Button Mouse

ü Monitor                -        SVGA

SOFTWARE CONFIGURATION:-

ü Operating System                    : Windows XP

ü Programming Language           : JAVA

ü Java Version                           : JDK 1.6 & above.

 

REFERENCE:

Yuh-Jye Lee, Yi-Ren Yeh, and Yu-Chiang Frank Wang, “Anomaly Detection via Online Over-Sampling Principal Component Analysis”, IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING 2013.

Categorized: Blog
Tagged: , , , , ,

This Post Has 1 Comment

  1. prasad says:

    Sir, i need the Project”Anomaly detection via online over sampling principal component analysis”.How much it cost?can u send me the screenshots or video link to my mail-id.its urgent.

Leave A Reply






one × = 8

Quick Contact ^
We want to thank you for contacting us through our website and let you know we have received your information. A member of our team will be promptly respond back to you.